MAGNET WIRE
UL FILE NO. E158033
OBMW2.E158033 Magnet Wire - Component |
|
P LEO & CO (B C) LTD |
E158033 |
PO BOX 94250 |
|
RICHMOND, BC V6Y 2A6 CANADA |
|
| P. Leo Designation | Coat Type |
ANSI Type NEMA | Thermal Class oC | |
Basecoat |
Overcoat |
|||
| EIW-200 | Polyesterimide | Polyamide-imide | MW35, MW73 | 200 |
| EI-200 | Polyesterimide | — |
MW74 | 200 |
| EIW-180 | MW30 | 180 | ||
| UEW-180 | Polyurethane | — |
MW82 | 180 |
| EIW-220 | Polyester | Polyamide-imide | MW37 | 220 |
| MW35, MW73 | 200 | |||
| EIA220 | Polyester-imide | Polyamideimide | MW37 | 220 |
| EIA200 | Polyester-imide | Polyamideimide | MW35, MW73 | 200 |
| UEW-79 | Polyurethane | — |
MW79 | 155 |
| MW75 | 130 | |||
| UEWY155 | Polyurethane | Nylon | MW80 | 155 |
| MW28 | 130 | |||
| PEWY200 | Polyester | Nylon | @ | 200 |
| MW76 | 180 | |||
| MW24 | 155 | |||
| UEW155F | Polyurethane | — |
MW79 | 155 |
| UEWH | Polyurethane | — |
MW75, MW79 | 130, 155 |
| MW82 | 180 | |||
| PEW155 | Polyester | — |
MW5 | 155 |
| EI-H | Polyester-imide | — |
MW30 | 180 |
| EI-N | Polyester-imide | — |
MW74 | 200 |
| EIWA-A | Polyester | Polyamideimide | MW73-A | 220 |
| EIW-CA | Polyester | Polyamideimide | MW-35-A | 220 |
| MW-35-C | 200 | |||
| UEW* | Polyurethane | MW82 | 180 | |
| MW79 | 155 | |||
| MW75 | 130 | |||
| UEW-Y180* | Polyurethane | Nylon | MW83 | 180 |
| UEW-Y155* | Polyurethane | Nylon | MW80 | 155 |
| UEW-Y130* | Polyurethane | Nylon | MW79 | 130 |
| **EI/SB**** or **PEI/AB/SB**** | Polyester-imide | Polyamide-imide+ Self-bonding coat | MW102 | 180 |
| FEIW*%@ | Polyesterimide | — |
MW77# | 180 |
| PSFW*% | Polyesterimide | — |
MW26 | 155 |
| SFBW*% | Polyesterimide | — |
-# | 130 |
| * | May be suffixed by 0,1,2,3 to indicate coating thickness. |
| + | ANSI type applies to round magnet wires. |
| @ | Non-ANSI type. |
| # | Additional consideration is needed before magnet wire is used in systems thermal aging. |
| **** or % | May be suffixed by LZ, EL or LZL, where "LZ" signifies magnet wires to indicate two or more twisted together; "EL" signifies base coated magnet wire laid parallel with overcoat applied overall; "LZL" signifies base coated magnet wire twisted together and covered with overcoat overall. |
Marking: Company name or trademarks 
or 
material designation or marked designation on package or reel and Recognized Component Mark.
*Color available : Natural/ Red/ Green
® Recognized Magnet Wire Card
at market@pleo.com
® Pbobbin ® BCwire ® BCmica ® BCtube ® is P. Leo & Co., (B.C.) Ltd. registered trade mark.